SHA850A Series Handheld Spectrum & Vector Network Analyzer
- Standard SA and CAT mode, optional VNA mode
- Frequency Range from 9 kHz up to 7.5 GHz
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -104 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
- 114 dB Dynamic Range in VNA mode (Typ.)
- Channel power, ACPR, Harmonics, and TOI measurement option
- Standard preamplifier, 8.4'' touch screen, 4 hours working time
- GPS location and logging
×
F604TS
Mechanical Calibration Kit: Open, Short, Match, Through, DC-9 GHz, 50Ω, 3.5 mm, Male and Female
F604FS
Mechanical Calibration Kit: Open(F), Short(F), Match(F,50), Through(F-F), DC-9 GHz, 3.5mm SMA-type
F604MS
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(M-M), DC-9 GHz, 3.5mm SMA-type
F603FE
Mechanical Calibration Kit: Open(F), Short(F), Match(F,50), Through(F-F), 4.5 GHz, 3.5mm SMA-type
F603ME
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(M-M), DC-4.5 GHz, SMA-type
F504TS
Mechanical Calibration Kit: Open, Short, Match, Through, DC-9 GHz, 50Ω, N-type, Male and Female
SRF5030T Near Field Probe Set
Three magnetic field near-field probes and one electric field near field probe
F504FS
Mechanical Calibration Kit: Open(F), Short(F), Match(F,50), Through(F-F), DC-9 GHz, N-type
F504MS
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(M-M), DC-9 GHz, N-type
F503FE
Mechanical Calibration Kit: Open(F), Short(F), Match(F,50), Through(F-F), DC-4.5 GHz, N-type
F503ME
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(M-M), DC-4.5 GHz, N-type
UKitSSA3X
Accessory Kit.
Includes coaxial cables, adapters, attenuator. See list below.
Includes coaxial cables, adapters, attenuator. See list below.
N-SMA-6L
6 GHz bandwidth, Length 0.7 m (27.6 inches).
N-N-6L
6 GHz bandwidth, Length 0.7 m (27.6 inches)
N-BNC-2L
2 GHz bandwidth, Length 0.7 m (27.6 inches)
N-N-18L
18 GHz bandwidth, Length 1.0 m
N-SMA-18L
18 GHz bandwidth, Length 1.0 m
SMA-SMA-18L
18 GHz bandwidth, Length : 1000 + 10 (mm)
Y504MS
Mechanical Calibration Kit for Vector Network Analyzers:
Open (M), short (M), Match/Load(M, 50 Ohms), Through (M-M ) DC - 9 GHz
Open (M), short (M), Match/Load(M, 50 Ohms), Through (M-M ) DC - 9 GHz
Y504FS
Mechanical Calibration Kit for Vector Network Analyzers:
Open (F), short (F), Match/Load(F, 50 Ohms), Through (F-F ) DC - 9 GHz
Open (F), short (F), Match/Load(F, 50 Ohms), Through (F-F ) DC - 9 GHz
ANT-DA11
Contains amplifier handle and 10MHz ~ 200MHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50Ω/N type, female; polarization direction horizontal and vertical.
To know more,click the 《Directional Antenna》
To know more,click the 《Directional Antenna》
ANT-DA12
Contains amplifier handle and 200MHz ~ 500MHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50Ω/N type, female; polarization direction horizontal and vertical.
To know more,click the 《Directional Antenna》
To know more,click the 《Directional Antenna》
ANT-DA13
Contains amplifier handle and 500MHz ~ 8GHz antenna. Antenna gain 10dB (typical value); SWR <1:1.9 (typical value); 50Ω/N type, female; polarization direction horizontal and vertical.
To know more,click the 《Directional Antenna》
To know more,click the 《Directional Antenna》
ANT-GPS1
GPS antenna, SMA(M), 100cm
12V_AP_4A
AC-DC adapter
10V8_BAT
Rechargeable lithium battery
BAG-H2
Portable bag
SHA850-AMK
Advanced Measurement Kit (SW)
SHA850-BIAS
DC Bias Out, 12V-32V (SW)
SHA850-DMA
Digital Modulation Analysis (SW)
SHA850-F2
Upgrade SHA851A to SHA852A (SW)
SHA850-GPS
GPS Receiver (SW)
SHA850-SOR
100 kHz~3.6/ 7.5 GHz independent source, -40 dBm ~ 0 dBm (SW)
SHA850-VNA
100 kHz-3.6/7.5 GHz vector network analyzer, vector S11 and S21 measurement (SW)
SHA850-MAP
GPS Logging (need GPS Receiver) (SW)
SHA850A AMA
Analog Modulation Analysis (SW)
SEM5000A
Electronic Calibration Kit: frequency range up to 4.5/9/13.5/26.5GHz, the RF connectors come in three forms: SMA female, 3.5mm female, and Type-N female.
SHA850-EMI
Unlocks the EMI measurement kit for SHA850A spectrum analyzers. Includes Quasi-peak detector, RBW bandwidths of 200/9k/120kHz/1MHz, and a 6dB filter used for EMI pre-compliance measurements.