SDS5000X Series Digital Storage Oscilloscopes-SIGLENT Technologies

SIGLENT： Home / Products

SDS5000X Series Digital Storage Oscilloscopes

Main Features

350 MHz, 500 MHz, 1 GHz models
Real-time sampling rate up to 5 GSa/s
Record Length up to 250 Mpts
Waveform capture rate up to 500,000 wfm/s (Sequence mode)
Serial bus triggering and decoder,supports I2C,SPI,UART, CAN,LIN,CAN FD,Flexray,I2S and MIL-STD-1553B

Videos

Compare

Downloads

SDS5000X Series Digital Storage Oscilloscopes

Overview Model Compare Videos Downloads Accessories Options Resources Applications

SAG1021I

25 MHz isolated USB function/arbitrary waveform generator.

SPL2016

Logic Probe hardware kit for the SDS2000X/SDS2000X Plus/SDS5000X/SDS6000A series of oscilloscopes.

SDS-5000X-PA

Unlock the power analysis option for the SDS5000X series of oscilloscopes. Requires a 4 channel SDS5000X, DF2001A deskew fixture, and at least one current probe for complete functionality.

SDS-5000X-16LA

Unlocks 16 digital channel control for the SDS5X series of oscilloscopes. Requires SPL2016 wiring harness for operation.

DF2001A Deskew Fixture

Power analysis deskew fixture.
For use with voltage and current probes and the Power Analysis option available on the 4 channel units of the SDS2000X,SDS2000X Plus, SDS5000X, SDS6000L and SDS6000A series oscilloscopes.

SDS-5000X-1553B

MIL-STD-1553B trigger & decode for the SDS5000X series oscilloscopes

SDS-5000X-CANFD

CAN FD trigger & decode for the SDS5000X series oscilloscopes

SDS-5000X-Manch

Manchester decode for the SDS5000X series oscilloscopes

SDS-5000X-SENT

SENT trigger & decode for the SDS5000X series oscilloscopes

SDS-5000X-FG

Unlocks external function generator control for the SDS5X series of oscilloscopes. Requires external generator hardware (SAG1021, SAG1021I) for operation.

SDS-5000X-FlexRay

FlexRay trigger & decode for the SDS5000X series oscilloscopes

SDS-5000X-IIS

I2S trigger & decode for the SDS5000X series oscilloscopes

SDS-5000X-2BW10

500 MHz to 1 GHz bandwidth upgrade (2-ch model)

SDS-5000X-4BW10

500 MHz to 1 GHz bandwidth upgrade (4-ch model)

SDS-5000X-2BW05

350 MHz to 500 MHz bandwidth upgrade (2-ch model)

SDS-5000X-4BW05

350 MHz to 500 MHz bandwidth upgrade (4-ch model)

High Voltage Probe

Bandwidth: 40 MHz; Maximum input differential voltage DC：10 KV; AC（rms）：7 KV（sine）;AC（Vpp）：20 KV（Pulse）; attenuation ratio1:1000; Accuracy：≤3%

High Voltage Differential Probe

DPB5150, DPB5150A, DPB5700, DPB5700A, DPB1300, DPB4080

SAG1021 (Discontinued)

Accessory for use with the four channel SDS1000X-E, SDS2000X-E, and SDS5000X oscilloscopes. Output Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms.The arbitrary waveforms can be accessed and edited by the EasyWave PC software.

Requires the correct Function Generator Activation License for the specific oscilloscope (part number ends with -FG)

Current Probe

CP4020; CP4050; CP4070; CP4070A; CP6030; CP6030A; CP6150; CP6500

CPL5100 Current Probe

L：50 mA~10 A Peak，0.1 V/A；H：1 A~100 A Peak，0.01 V/A

SAP1000 Active Probe

1 GHz single-ended active probe for use with the SIGLENT SDS5000X, SDS6000A series oscilloscope

STB-3

The STB-3 was designed as a teaching / training aid used to demonstrate how to trigger and display complex signals on a modern oscilloscope. Signals include various sine and square waves, AM, burst, and common serial bus signals. Power is supplied by a standard USB cable.