SDM3055 Firmware Update
Version：
V1.02.01.28
2024-05-24
Release notes
- Added software options for accessory SCD30A.
- Only upgrading to 1.02.01.27R2 can upgrade to this version
SDM3055 Firmware Update
Version：
V1.02.01.27R2
2024-05-24
Release notes
- Supports EMMC flash.
- Add user-defined cold end compensation for temperature measurement.
- After upgrading to version 1.02, you cannot return to version 1.01
SDM3055 Firmware Update
Version：
V1.01.01.27R2
2023-04-27
SDM3055 Firmware Update
Version：
V1.01.01.25
2021-08-06
Release notes
- Add the scan card setup save & recall function.
- Optimize the slot time of the channel switching of scan card.
- Optimize flash R&W design。
- Fix some UI & SCPI bugs
SDM3055 Series Firmware Update
Version：
V1.01.01.22
2021-01-08
Release notes
- Fixed some crash fault about U disk save or recall.
- Fixed some bugs about ‘acquire’ function.
- Improve the trend display function.
SDM3055 Series Firmware Update
Version：
V1.01.01.22R1
2021-02-07
Release notes
- Fix some unit faults of 22version.
- Fixed some bugs about communication with EasyDMM
SDM3055 Series Firmware Update
Version：
V1.01.01.20R2
2019-11-21
SDM3055 Series Firmware Update
Version：
V1.01.01.19
2017-09-01
SDM3055 Series Firmware Update
Version：
V1.01.01.16R2
2016-03-17
SDM3065X Firmware Update
Version：
V3.01.01.12R1
2023-04-27
SDM3045X Firmware Update
Version：
V5.01.01.09R2
2023-04-27
SDM3065X Series Firmware Update
Version：
V3.01.01.10
2021-08-09
Release notes
1. Add the scan card setup save&recall function.
2. Optimize the slot time of the channel switching of scan card.
3. Optimize flash R&W design.
4. Fix some UI & SCPI bugs
2. Optimize the slot time of the channel switching of scan card.
3. Optimize flash R&W design.
4. Fix some UI & SCPI bugs
SDM3045X Series Firmware Update
Version：
V5.01.01.07R1
2021-09-24
Release notes
1. Add the customer sensor support.
2. Optimize flash R&W design。
3. Fix some UI & SCPI bugs
SDM3065X Series Firmware Update
Version：
V3.01.01.08R1
2021-02-07
Release notes
- Fixed some crash faults about U disk Save &Recall.
- Fixed some bugs about “acquire” function.
- Improve the trend display function.
- Fixed some bugs about communication with EasyDMM
SDM3045X Series Firmware Update
Version：
V5.01.01.06R1
2021-02-07
Release notes
- Fixed some unit faults in 06 version
- Fixed some bugs about communication with EasyDMM.
SDM3065X Series Firmware Update
Version：
V3.01.01.07
2020-03-26
Release notes
- Add customer defined senor function
- Add PT1000 thermistor.
- Add buzzer volume control function.
- Added customer defined time base in the trend diagram
- Added recording measurement data to external U disk .
- Fix some bugs: change the text size in the Dual display, the screen saving setup will be lost after reboot, move the CSV save function from the utility page to acquire page.
SDM3045X Series Firmware Update
Version：
V5.01.01.05R3
2019-10-29
Release notes
1. Fix a bug about single trig function .
2. Fix a bug about save/recall function.
3. Fix a bug in U disk update function .
4. Optimize the temperature measure function.
2. Fix a bug about save/recall function.
3. Fix a bug in U disk update function .
4. Optimize the temperature measure function.
SDM3065X Series Firmware Update
Version：
V3.01.01.06R2
2019-03-29
SDM3065X Series Firmware Update
Version：
V3.01.01.03
2017-09-01
SDM3045X Series Firmware Update
Version：
V5.01.01.03
2017-09-14
SDM4055A Firmware Update
Version：
V0.0.0.10
2025-10-21
Release notes
1. Supports SMB and NTP functions.
2. Optimized reading timecost of range switching with low speed.
3. Bug fixes
a) Wrong reading with fast speed setting.
b) The number of bins in the histogram set unsuccessfully manually.
c) Time info fail to save after reboot.
d) Screen dump fail while the u disk is inserted to device at the first time.
e) Auto range fails in cap measurement with certain input value.
f) Wrong voltage reading while resistance was set to 10G ohm.
g) uA range fail to work in current mode.
h) Reading wrong in dual mode.
2. Optimized reading timecost of range switching with low speed.
3. Bug fixes
a) Wrong reading with fast speed setting.
b) The number of bins in the histogram set unsuccessfully manually.
c) Time info fail to save after reboot.
d) Screen dump fail while the u disk is inserted to device at the first time.
e) Auto range fails in cap measurement with certain input value.
f) Wrong voltage reading while resistance was set to 10G ohm.
g) uA range fail to work in current mode.
h) Reading wrong in dual mode.
SDM4065X Firmware Update
Version：
V0.0.0.20
2025-10-10
Release notes
1.Supports SMB and NTP functions.
2.Optimized noise after AZ is enabled.
3.Optimized noise after 100PLC is enabled.
4.Supports saving readings, statistics, and histograms in the scanner card function.
5.Supports relative value settings, statistics, and histograms in the dual display function.
6.Bug fixes
2.Optimized noise after AZ is enabled.
3.Optimized noise after 100PLC is enabled.
4.Supports saving readings, statistics, and histograms in the scanner card function.
5.Supports relative value settings, statistics, and histograms in the dual display function.
6.Bug fixes
a)System crashes when entering the wrong password during recalibration.
b)Statistics occasionally show 0 in math.
c)Fixed an issue where overload values were recorded during probe-hold.
d)The digitizer would freeze at certain sampling rates and readings.
e)Device malfunctions occurred when using the scanner card's universal remote control command function.
f)File path errors when browsing when holding readings.
g)Selecting uA in current mode did not work.
b)Statistics occasionally show 0 in math.
c)Fixed an issue where overload values were recorded during probe-hold.
d)The digitizer would freeze at certain sampling rates and readings.
e)Device malfunctions occurred when using the scanner card's universal remote control command function.
f)File path errors when browsing when holding readings.
g)Selecting uA in current mode did not work.
Release Notes
Release Notes
