SHS1000X Handheld Oscilloscope
- Isolation voltage：CATIII 600 Vrms, CATII 1000 Vrms
- Integrate oscilloscope, serial trigger and decoder, spectrum analysis, data logger and multimeter functions into a convenient and portable design
- 100 MHz or 200 MHz bandwidth models
- sample rate of 1 GSa/s (single-channel), sample rate of 500 MSa/s (two-channels)
- record length up to 12 Mpts.
- Hardware-based ture RMS multimeter
- IP51 certified
×
Comparative Data
SHS1000X
Keysight U1600A
Fluke 190-102 Series III
Bandwidth
200/100 MHz
200/100 MHz
100 MHz
Max Floating Voltage
CATIII 600 Vrms, CATII 1000 Vrms
CAT III 300 V
CAT III 1000 V/CAT IV 600 V
Bandwidth Limit
20 MHz
10 kHz and 20 MHz (selectable)
20 MHz and 10 kHz
Scope Channel
2
2
2
CH to CH isolation
DC-Max BW; >40 dB
-
-
Sampling rate
1 Gsa/s
2 /1 Gsa/s
1.25 GS/s
Memory Depth
12 Mpts in total
2 Mpts/ 120 kpts
10 kpts
Wavefrom Capture Rate
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
-
-
ERES
Enhance bits:0.5, 1.5, 2, 2.5, 3
-
-
Vertical Scale
5 mV/div-100 V/div
2 mV/div - 50 V/div
2 mV/div-100 V/div
DC Gain Accuracy
≤±2%; ≥10 mV/div, ≤±3%: <10 mV/div
± 4% of full scale
-
Timebase Scale
1.0 ns/div-100 s/div
U1620A : 2 ns/div to 50 s/div, U1610A : 5 ns/div to 50 s/div
5 ns/div-4 s/div
Trigger Types
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern,Video
Edge, Glitch, TV, Nth Edge, CAN, LIN
Automatic, Edge, Pulse Width, N-Cycle
Serial Trigger and decoder
IIC, SPI, UART, CAN, LIN
No
No
Measurement Statistics
Current, Mean, Min, Max, Stdev, Count
-
add, subtract, multiply; X-Y-mode; Frequency Spectrum using FFT
FFT points
1 Mpts
1024 pts
-
DMM Counts
6,000 counts
10,000 counts
5,000 counts
IP Rating
IP51
IP41
IP51
Battery
6900 mA 4 hours
10.8 V 3 hours
3.5 hours,with BP290: 10.8V, 2500 mAh 7 hours with BP291 (5000 mAh) optional
Note: The above prices and parameters were collected on the official website of each brand on April 26, 2022. If there are any differences, please refer to the offical website.
