SDS7000A Firmware Update
Version：
V1.1.9.1R1
2025-06-13
Release notes
1. Supported new AP models: SDS7804AP, SDS7604AP
2. Supported Enhanced Bandwidth on 4GHz and below models (Only applied to units which are produced with 1.1.9.1R1 and later FW)
3. Improved the response speed in the case of deep waveform length
4. Compliance test:
a) Added MIPI-DPHY
b) Added 2.5G/5G/10GBASE-T
c) For USB2.0, added Receiver Sensitivity test, and supported upgrading the FW of the fixture by the scope
5. Math:
a) Added operators Tan, Atan
b) Added operator FFTPhase
c) Added new windows Black-Harris and Gaussian for FFT
6.
Decode: added CANXL
7. Optimized refresh speed in the case of Roll + Zoom
8. Eye Diagram: added Second order PLL for Clock Recovery
9. Save/Recall
a) Supported to save all segments in sequence mode to one single .mat file
b) Supported to save all channels’ data to one file
c) Supported Full Screen view of pictures in File Manager
10. Supported Wake-on-LAN (Some setting change is necessary. Contact SIGLENT for detailed information)
11. WGEN: supported the case in which built-in and external generators are both in use
12. Fixed several bugs
2. Supported Enhanced Bandwidth on 4GHz and below models (Only applied to units which are produced with 1.1.9.1R1 and later FW)
3. Improved the response speed in the case of deep waveform length
4. Compliance test:
a) Added MIPI-DPHY
b) Added 2.5G/5G/10GBASE-T
c) For USB2.0, added Receiver Sensitivity test, and supported upgrading the FW of the fixture by the scope
5. Math:
a) Added operators Tan, Atan
b) Added operator FFTPhase
c) Added new windows Black-Harris and Gaussian for FFT
6.
Decode: added CANXL
7. Optimized refresh speed in the case of Roll + Zoom
8. Eye Diagram: added Second order PLL for Clock Recovery
9. Save/Recall
a) Supported to save all segments in sequence mode to one single .mat file
b) Supported to save all channels’ data to one file
c) Supported Full Screen view of pictures in File Manager
10. Supported Wake-on-LAN (Some setting change is necessary. Contact SIGLENT for detailed information)
11. WGEN: supported the case in which built-in and external generators are both in use
12. Fixed several bugs
SDS7000A Firmware Update
Version：
V1.1.7.7
2024-12-26
Release notes
1. Supported new model: SDS7604A H12
2. Cursor: new cursor strategy, supporting multi cursors
3.Made Option 16LA Standard
4. Fixed several bugs
a) Stuck at splash screen after upgrade
b) Power off operation at start-up process brings the instrument to dead
2. Cursor: new cursor strategy, supporting multi cursors
3.Made Option 16LA Standard
4. Fixed several bugs
a) Stuck at splash screen after upgrade
b) Power off operation at start-up process brings the instrument to dead
SDS7000A Firmware Update
Version：
V1.1.5.2
2024-06-05
Release notes
Solved some issue on production line
SDS7000A Firmware Update
Version：
V1.1.5.1
2024-04-02
Release notes
1. Cursor: Supported more cursors, and more flexible cursor combination
2. Fixed several bugs
2. Fixed several bugs
SDS7000A Firmware Update
Version：
V1.1.4.2
2024-03-12
Release notes
- Supported new probes: Siglent’s SCP5030, SCP5030A, SCP5150, SCP5500
- Measure: Optimized UX of Track and Trend; Supported to export measure data
- Fixed several bugs
- Slow response after pressing Math button
- AWG: SCPI cannot set Load
- Some bugs of USB2.0 compliance test
- Some bugs of 100Base-TX and 1000Base-T compliance test
- Some bugs on Options’ unlock
Release Notes
Release Notes
