SVA1015X Firmware Update
Version：
V3.2.2.4.0R2
2021-02-09
Release notes
Notice: This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
This version can not be rolled back
Fix the VNA option license error on some SVA1015X and SVA1075X units
This version can not be rolled back
Fix the VNA option license error on some SVA1015X and SVA1075X units
SVA1075X Firmware Update
Version：
V3.2.2.4.0R2
2021-02-09
Release notes
Notice: This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
This version can not be rolled back
Fix the VNA option license error on some SVA1015X and SVA1075X units
This version can not be rolled back
Fix the VNA option license error on some SVA1015X and SVA1075X units
SVA1032X Firmware Update
Version：
V3.2.2.4.0
2021-01-21
Release notes
Notice:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
- This version can not be rolled back
- Fix TG switch error at small RBW
- Fix Help and Limit file lost when Factory reset
- Fix Auto open delay unit error in VNA mode
- Fix CNR calc error when no peak found
- Fix OBW result overflow
- Fix Harmonic calc error at 100Hz RBW
- Fix Reflection Open+Short calibration action
- Fix spectrum amplitude error in DMA mode
- Optimize EMI .csv file content to all signal list
- Optimize EMI peak search
- Optimize Auto cal process
- Add Peak search to Spectrum in DMA mode
SNA5022A&SNA5032A Firmware Update
Version：
V1.0.0.2.12
2024-05-28
Release notes
1. Add material measurement function option
2. Add switch matrix expansion multi-port application options
2. Add switch matrix expansion multi-port application options
SVA1032X Firmware Update
Version：
V3.2.2.3.3R1
2020-12-11
Release notes
Notice:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
SNA5000A Firmware Update
Version：
V1.0.0.2.12
2024-05-28
Release notes
1. Add material measurement function option
2. Add switch matrix expansion multi-port application options
2. Add switch matrix expansion multi-port application options
SVA1015X Firmware Update
Version：
V3.2.2.3.3R1
2020-12-11
Release notes
Notice:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
SNA5000A Firmware Update
Version：
V1.0.0.2.11.R6
2023-12-11
Release notes
1. add manual configuration of DC under TDR
2. overwrite function added to calibration
3. optimize synchronization of extemal triggers for pulse measurements
2. overwrite function added to calibration
3. optimize synchronization of extemal triggers for pulse measurements
SVA1075X Firmware Update
Version：
V3.2.2.3.3R1
2020-12-11
Release notes
Notice:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Add EMI filter in SA for EMI option
Solved Issues:
• Optimize the TG flatness and control procedure
• Optimize Help
• Fix Correction, .csv file, add peak numbers to 20 in EMI mode
• Fix ADC overload warning error, and time unit error in Calibration in VNA Mode
• Fix amplitude error in DMA Mode
• Fix upgrade failure issue
SNA5022A&SNA5032A Firmware Update
Version：
V1.0.0.2.11.R6
2023-11-29
Release notes
1.Add manual configuration of DC under TDR
2.Add calibration overwrite function
3.Optimize synchronization of external triggers for pulse measurements
2.Add calibration overwrite function
3.Optimize synchronization of external triggers for pulse measurements
SNA5022A&SNA5032A Firmware Update
Version：
V1.0.0.2.11.R1
2023-09-22
Release notes
1. Fixed the range limits for frequency and power in mixer measurements
2. Fixed the trace title bar color to match the memory trace color
2. Fixed the trace title bar color to match the memory trace color
SVA1032X Firmware Update
Version：
V3.2.2.3.2
2020-09-18
Release notes
Notice:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
Solved Issues:
This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
- Add user defined VNA calibration kits
- Add VNA 0 span calibration
Solved Issues:
- Fix avg power bug in EMI Mode
- Fix amplitude bug in AMA Mode
- Fix peak search bug in SCPI command
SNA5000A Firmware Update
Version：
V1.0.0.2.11.R1
2023-09-19
Release notes
1. Fixed the range limits for frequency and power in mixer measurements.
2. Fixed the trace title bar color to match the memory trace color.
2. Fixed the trace title bar color to match the memory trace color.
SNA5022A&SNA5032A Firmware Update
Version：
V1.0.0.2.11
2023-07-18
Release notes
Added Pulse modulation function
SVA1032X Firmware Update
Version：
V2.2.1.2.8
2020-07-24
Release notes
Notice: This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Update EMI option to a new EMI measurement mode
• Added more VNA calibration kits with N/3.5mm type connectors to 4.5G/9.0GHz
• Added *.CSA file type to store instrument setup and calibration data in one file for easy recall and use of a saved state.
• Update user calibration data format.
CAUTION:
User calibration data taken with previous firmware revisions will no longer be compatible with the instrument after upgrading to V2.8. You will have to store new user calibration files if you update the instrument.
• VNA Port 1 output power and Port2 input Att adjustable
Improvements:
• Improve TG output harmonic performance
• Update Help file
Solved Issues:
• Fix some ADC overload warning
• Fix Ch Power calculation bug in small span
New Functionality:
• Update EMI option to a new EMI measurement mode
• Added more VNA calibration kits with N/3.5mm type connectors to 4.5G/9.0GHz
• Added *.CSA file type to store instrument setup and calibration data in one file for easy recall and use of a saved state.
• Update user calibration data format.
CAUTION:
User calibration data taken with previous firmware revisions will no longer be compatible with the instrument after upgrading to V2.8. You will have to store new user calibration files if you update the instrument.
• VNA Port 1 output power and Port2 input Att adjustable
Improvements:
• Improve TG output harmonic performance
• Update Help file
Solved Issues:
• Fix some ADC overload warning
• Fix Ch Power calculation bug in small span
SNA5000A Firmware Update
Version：
V1.0.0.2.11
2023-07-11
Release notes
Added Pulse modulation function
SVA1015X Firmware Update
Version：
V2.2.1.2.8
2020-07-24
Release notes
Notice: This firmware must be upgraded from V2.1.1.1.12a or later. If your SVA1000X has an earlier version, please update to V2.1.1.1.12a first and then proceed to update to the latest version.
New Functionality:
• Update EMI option to a new EMI measurement mode
• Added more VNA calibration kits with N/3.5mm type connectors to 4.5G/9.0GHz
• Added *.CSA file type to store instrument setup and calibration data in one file for easy recall and use of a saved state.
• Update user calibration data format.
CAUTION: User calibration data taken with previous firmware revisions will no longer be compatible with the instrument after upgrading to V2.8. You will have to store new user calibration files if you update the instrument.
• VNA Port 1 output power and Port2 input Att adjustable
Improvements:
• Improve TG output harmonic performance
• Update Help file
Solved Issues:
• Fix some ADC overload warning
• Fix Ch Power calculation bug in small span
New Functionality:
• Update EMI option to a new EMI measurement mode
• Added more VNA calibration kits with N/3.5mm type connectors to 4.5G/9.0GHz
• Added *.CSA file type to store instrument setup and calibration data in one file for easy recall and use of a saved state.
• Update user calibration data format.
CAUTION: User calibration data taken with previous firmware revisions will no longer be compatible with the instrument after upgrading to V2.8. You will have to store new user calibration files if you update the instrument.
• VNA Port 1 output power and Port2 input Att adjustable
Improvements:
• Improve TG output harmonic performance
• Update Help file
Solved Issues:
• Fix some ADC overload warning
• Fix Ch Power calculation bug in small span
SNA5022A&SNA5032A Firmware Update
Version：
V1.0.0.2.10R10
2023-03-20
Release notes
1. Added user manual calibration and verification function (option)
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
SNA5000A Firmware Update
Version：
V1.0.0.2.10R10
2023-03-20
Release notes
1. Added user manual calibration and verification function (option)
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
SNA5000A Firmware Update
Version：
V1.0.0.2.10R9
2022-11-18
Release notes
1. Added scalar mixer measurement function
2. Adjusted and optimized the spectrum analysis measure interface
2. Adjusted and optimized the spectrum analysis measure interface
SVA1032X Firmware Update
Version：
V2.2.1.2.5
2019-11-25
SNA5000A Firmware Update
Version：
V1.0.0.2.10.R8
2022-10-11
Release notes
1. Added Freq Offset function
2. Optimized some functions of spectrum analysis
3. Added status bar to display smooth status
4. Added advanced mode for bandwidth search, support frequency percentage bandwidth setting function
5. Optimized the Marker->Delay algorithm
2. Optimized some functions of spectrum analysis
3. Added status bar to display smooth status
4. Added advanced mode for bandwidth search, support frequency percentage bandwidth setting function
5. Optimized the Marker->Delay algorithm
SVA1015X Firmware Update
Version：
V2.2.1.2.5
2019-11-25
SNA5000A Firmware Update
Version：
V1.0.0.2.10.R5
2022-07-14
Release notes
1. Added independent configuration function of emission source in spectrum mode
2. Optimized the sweep process
3. Optimized TDR interface
4. Added command for transferring file data
5. Added marker->SA commands
2. Optimized the sweep process
3. Optimized TDR interface
4. Added command for transferring file data
5. Added marker->SA commands
SVA1015X Firmware Update
Version：
V2.2.1.2.2
2019-08-12
SNA5000 Firmware Update
Version：
V1.0.0.2.10
2022-03-29
Release notes
1. Added spectrum analyzer option
2. Fixed input bug in network configuration window
3. Fixed mouse click input box crash bug
4. Increased the touch-sensitive area of the DHCP checkbox
5. Modified the policy when the DHCP request fails
2. Fixed input bug in network configuration window
3. Fixed mouse click input box crash bug
4. Increased the touch-sensitive area of the DHCP checkbox
5. Modified the policy when the DHCP request fails
SVA1015X Firmware Update
Version：
V2.2.1.2.1
2019-07-19
SNA5000 Firmware Update
Version：
V1.0.0.2.9.R5
2021-12-30
Release notes
1. Solved the menu button is not updated when the electronic calibration module is inserted or removed
2. Fixed a bug that the touch screen may crash under some cases
3. Fixed an option installation bug
2. Fixed a bug that the touch screen may crash under some cases
3. Fixed an option installation bug
SVA1015X Firmware Update
Version：
V2.1.1.1.13
2018-12-07
SNA5000A Firmware Update
Version：
V1.0.0.2.8
2021-09-28
Release notes
The first released version
SVA1015X Firmware Update
Version：
V2.1.1.1.12.a
2018-08-14
SHN900A Firmware Update
Version：
V1.0.0.2.12
2024-06-28
Release notes
1.The first time introduced.
2.Added open source agreement description.
2.Added open source agreement description.
Release Notes
Release Notes
