Siglent SDG 1000 5000 800 Series Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: Siglent Technologies
Supported Language(s): LabVIEW 2014


Supported Model(s): Function/Arbitrary Waveform Generator

SDG1000 Series: SDG1000 SDG1005, SDG1010, SDG1020, SDG1025, SDG1050

SDG5000 Series: SDG5082, SDG5122, SDG5162

SDG800 Series: SDG805, SDG810 and SDG830

SDG2000 Series: SDG2042X, SDG2082X, SDG2122X, SDG2042E, SDG2082E, SDG2122E

 

Model(s) Tested: SDG1050, SDG5162, SDG830, SDG2122X

Interface(s): USB, GPIB, LAN
Firmware Revision(s) Tested: 1.01.01.36R1 (SDG1050), 5.01.01.12 (SDG5162), 1.08.01.08(SDG830), 2.01.01.15R2(SDG2122X)

Certified: Yes
NI Supported: Yes
Source Code Available: Yes

Driver Revision: 1.2
Original Release Date: 08/13/2015
Current Revision Date: 01/15/2016

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

VISA 5.0 or later

Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.

3. Known Issues

To report issues or provide feedback about this instrument driver, please send an email to instrument.drivers@ni.com.

4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.0, 08/13/2015
Created by: Iris.Yuan, SIGLENT TECHNOLOGIES CO.,LTD
Original release.

 

REV 1.1, 12/10/2015
Revised by: Iris.Yuan, SIGLENT TECHNOLOGIES CO.,LTD
1. Add SDG2042X, SDG2082X, SDG2122X, SDG2042E, SDG2082E and SDG2122E models and add valid ranges for each control.

2. Add Configure Modulation (PSK).vi

 

REV 1.2, 01/15/2016
Revised by: Iris.Yuan, SIGLENT TECHNOLOGIES CO.,LTD
1. To control the SDG2042X, SDG2082X, SDG2122X, SDG2042E, SDG2082E and SDG2122E models via LAN interface, change all the Asynchronous I/O Mode of VISA Write or VISA Read to Synchronous.

2. Modify the unreasonable notes and default values of some control for Configure Burst.vi and Configure Modulation (PSK).vi, etc.

3. Confiugure Modulation (PSK) was missing a control from connector pane